I know posting has been sparse lately but it is because I have been working on creating a photo album for our parents. Whew, I know why photographers charge so much for those puppies... they are A LOT of work! Here is what I came up with:
Would you change anything? If so, what, and should I move it, delete it, add it?
Showing posts with label DIY. Show all posts
Showing posts with label DIY. Show all posts
Friday, August 20, 2010
Saturday, August 7, 2010
Cruisin' in the Fast Lane: Strike a Pose!
Our photobooth in action...
The photobooth was a HUGE hit with all of our guests especially the younger ones! We both thought it turned out great but there are a few things we could have done better...
1) Get another battery and have it charged. Our battery ran out about halfway causing us to have to close down and charge the battery up putting a HUGE dent in the photobooth momentum.
The photobooth was a HUGE hit with all of our guests especially the younger ones! We both thought it turned out great but there are a few things we could have done better...
1) Get another battery and have it charged. Our battery ran out about halfway causing us to have to close down and charge the battery up putting a HUGE dent in the photobooth momentum.
2) Get someone to take pictures. We used a remote and believe people mistakenly held down the button too long so we ended up with every other "picture" being a video. This also contributed significantly to the battery suck. This will also prevent people from moving the tripod or taking your camera off the tripod (yep, that happened).
3) Go to the photobooth. Neither my husband nor I set foot anywhere near our photobooth. Big tear. :(
3) Go to the photobooth. Neither my husband nor I set foot anywhere near our photobooth. Big tear. :(
Cruisin' in the Fast Lane: Accessorizing the Photobooth
Ryan and I wanted wanted our photobooth to be kickass so we did our best to gather up some fun and playful accessories. We bought a chalkboard, an empty picture frame, some vintage hats, a parasol, and we made some mustaches.
To make these bad boys I bought some crafting fur at Hobby Lobby for $2.99. One piece was enough to create 2 of each design.
I then used a mustache template that I found here and traced the mustaches onto the back of the fur and onto brown felt using a sharpie. I then cut out the templates, sandwiched a dowel rod in between the piece of felt and mustache, and secured with hot glue. Finally I touched up the mustaches by trimming them up with facial hair scissors.
To make these bad boys I bought some crafting fur at Hobby Lobby for $2.99. One piece was enough to create 2 of each design.
![]() |
[Source: Hobby Lobby] |
Monday, August 2, 2010
Cruisin' in the Fast Lane: Construction Zone
Early on Ryan and I decided we would like to do a "faux"to booth at our wedding. If you never heard of this increasingly popular wedding event, it involves setting up a background, providing some props, and either using a photographer or camera/tripod/remote system to allow guest to take funny snap-shots.
![]() |
| [Source: You Look Nice Today via Ruffled] |
| [Source: Lena Corwin's Wedding via Green Wedding Shoes] |
'FAUX'to Booth Tutorial
To make our own photobooth we modified a DIY Greenscreen Tutorial to fit our needs. First we needed to purchase our materials:
•3/4"x10' Sch. 40 PVC Pipe- 4
•3/4" Sch. 40 PVC 90 Degree Elbow- 2
•3/4" Sch. 40 PVC T-Connector- 2
•3/4" Sch. 40 PVC Cap- 8
•3/4" Sch. 40 PVC Coupling- 2
•3/4" Sch. 40 PVC Cross Connector- 2
Total cost for all of these materials should be less than $25. You will also need a PVC pipe cutter or hacksaw, which thankfully my dad had.
To assemble:
- Cut 2 pieces of 3/4" PVC pipe into approximately 24" lengths. Put a cap on one end of each section.
- Slide a T-Connector onto each 24" length.
- Cut 8 pieces of 3/4" PVC pipe into approximately 18" lengths putting a cap of one end of each section.
- Stick the open ends of each pipe into a cross connector using 18" lengths for three of the holes and a 24" length with T-Connector into the fourth hole.
![]() |
[Source: DIY Greenscreens] |
![]() |
| [Source: DIY Greenscreens] |
- These pieces will be inserted vertically into the top of the T-Connector.
- Cut the length of your crossbar to width of your fabric plus about 5 inches.- Attach the 90 degree elbow connectors to the ends of the crossbars and to the top of the vertical pipes.
- Secure your fabric to the top of the pipe using clamps, velcro, tape, pins, etc.
ATTENTION: This frame is not meant to be a permanent structure and is wobbly. Be sure to reenforce joints with heavy duty tape, such as duct tape, if you are worried about the durability.
We purchased 10 yards of Premier Prints Kimono fabric in Chartreuse/White from Fabric.com and had WAY TOO MUCH. We joke that we'll be making play clothes for our children, grandchildren, and great children like Julie Andrews in The Sound of Music.
![]() |
[Source: Fabric.com] |
| [Groomsmen] |
Friday, March 26, 2010
Milk-a-WHAT?
Through wedding planning I have discovered that some everyday items that aren't normally pricey when purchased in wedding volume becoming EXTREMELY pricey. Take candles for instance, normally you spend $2-$30 for one or a small set BUT when you have to purchase 2-4 for each table and you have 15-18 tables and you need still need containers to put the candles in or on.... let's just say it adds up quickly.
So in an effort to conserve some funds Ryan and I stopped by some second hand stores in search of some votive holders, pillar candle holders, or other candle containers.
Let's just say we found Milk Glass Mecca! Look at the fantastic pieces we were able to pick up for less than $40...

So what does all this milk glass have to do with our search for candles and candle holders? Well I channeled my inner Martha and decided to attempt to turn them all into candles. My favorite finds were these ceiling fan globes which we will use to cover votive candles...

For the rest of the milk glass I picked up 20lbs of paraffin wax, a variety of different sized wicks, and a wax thermometer from Hobby Lobby. To start I cleaned all the pieces really well with soap and water, using a little goo gone where needed, and allowed them to completely dry. Using a hammer I then broke the slabs of paraffin wax into more managable sized pieces. I improvised a double boiler using a medium sized saucepan and a large pyrex bowl. The trick here is that when you add water to the saucepan you do not want it to touch the bottom of the bowl and you want the bowl to fit snuggly on the saucepan to prevent too much steam from escaping. I then started throwing chunks of wax in the bowl and waited for it to melt.

I attached the wicks to the bottom of the containers by dipping them into the melted wax and then quickly centered them on the bottom of the milk glass. This may take a few dips to accumulate enough wax to stick and don't worry if you misplace the wick, they come up pretty easily.

Finally I poured all the candles being sure to leave adequate amounts of wick available. For wicks that wouldn't stay straight I used some dowel rods from another project to help stabilize them until they were set. You could easily use pencils, food skewers, or any other relatively long and sturdy object you have around your house.

Lessons learned:
-The wax thermometer is a joke don't waste your money. Mine broke after a few hours.
-Some candles shrink up significantly after drying be prepared to pour candles multiple times.
-Get a cheapo saucepan the you can throw away after the project as the wax splatters everywhere and I'm still having a hell of time getting it off my good saucepan.
-Purchase some Goo Gone it really helped remove wax splatters from my floor, countertops, and stove.
-Do this on a day when you can be at home for a while as it takes some time and can't be left unattended
-Be VERY careful not to drip wax on your hot burners. Paraffin wax is flammable at higher temperatures and will catch on fire if it hits a scalding burner. (Not that I would know this from personal experience or anything... I swear).
Time: This project took the better part of the day but had a lot of down time while waiting for the wax to melt.
Difficulty Level: Easy
Cost:
Milk Glass- 40 pieces for ~$40
Wax Thermometer- $7.00
Wicks (for 40 of varying sizes)- $9.00
Paraffin Wax (20lbs)- $30.00
Total Cost: $86.00 or $2.15 per candle
Have you found any second hand store finds? What did you end up using them for?
So in an effort to conserve some funds Ryan and I stopped by some second hand stores in search of some votive holders, pillar candle holders, or other candle containers.
Let's just say we found Milk Glass Mecca! Look at the fantastic pieces we were able to pick up for less than $40...
So what does all this milk glass have to do with our search for candles and candle holders? Well I channeled my inner Martha and decided to attempt to turn them all into candles. My favorite finds were these ceiling fan globes which we will use to cover votive candles...
For the rest of the milk glass I picked up 20lbs of paraffin wax, a variety of different sized wicks, and a wax thermometer from Hobby Lobby. To start I cleaned all the pieces really well with soap and water, using a little goo gone where needed, and allowed them to completely dry. Using a hammer I then broke the slabs of paraffin wax into more managable sized pieces. I improvised a double boiler using a medium sized saucepan and a large pyrex bowl. The trick here is that when you add water to the saucepan you do not want it to touch the bottom of the bowl and you want the bowl to fit snuggly on the saucepan to prevent too much steam from escaping. I then started throwing chunks of wax in the bowl and waited for it to melt.
I attached the wicks to the bottom of the containers by dipping them into the melted wax and then quickly centered them on the bottom of the milk glass. This may take a few dips to accumulate enough wax to stick and don't worry if you misplace the wick, they come up pretty easily.
Finally I poured all the candles being sure to leave adequate amounts of wick available. For wicks that wouldn't stay straight I used some dowel rods from another project to help stabilize them until they were set. You could easily use pencils, food skewers, or any other relatively long and sturdy object you have around your house.
Lessons learned:
-The wax thermometer is a joke don't waste your money. Mine broke after a few hours.
-Some candles shrink up significantly after drying be prepared to pour candles multiple times.
-Get a cheapo saucepan the you can throw away after the project as the wax splatters everywhere and I'm still having a hell of time getting it off my good saucepan.
-Purchase some Goo Gone it really helped remove wax splatters from my floor, countertops, and stove.
-Do this on a day when you can be at home for a while as it takes some time and can't be left unattended
-Be VERY careful not to drip wax on your hot burners. Paraffin wax is flammable at higher temperatures and will catch on fire if it hits a scalding burner. (Not that I would know this from personal experience or anything... I swear).
Time: This project took the better part of the day but had a lot of down time while waiting for the wax to melt.
Difficulty Level: Easy
Cost:
Milk Glass- 40 pieces for ~$40
Wax Thermometer- $7.00
Wicks (for 40 of varying sizes)- $9.00
Paraffin Wax (20lbs)- $30.00
Total Cost: $86.00 or $2.15 per candle
Have you found any second hand store finds? What did you end up using them for?
Saturday, March 13, 2010
DIY Invitations Part V: What's on the Outside Matters Too
When it came to the outer envelopes we felt it was important to have them all hand addressed. A calligrapher was not in the budget so we had to come up with a way to improvise. While browsing Wedding Bee I came across Mrs. Labrador's post about fauxligraphy...and thought I can do that!
Some Fauxligraphy Tips:
1. This works best on non-white envelopes. For some reason, no matter what marker/pen I used on the white envelopes the ink soaked in around printed text and was evident that I traced.
2. Textured paper makes tracing soooo much harder! Try to avoid having to trace on textured paper it made my pen strokes look all the more sloppy.
3. Test out your writing apparatus A LOT. I can say this enough: practice, practice, practice. Practice writing each letter, practice using the marker/pen it really made a difference in the quality of my work.
I pulled up every calligraphy font I could find on my computer and on dafont and started practicing. The Mr. even tried his hand at some practice tracing but it wasn't a pretty sight. ;) We eventually settled on the same font Mrs. Labrador used.
After some trial and error (trying every color in the rainbow) I found the best way to print on the black envelopes and still see the print was to use LIME GREEN text. It was really faint but you could make it out.
Then me and my silver sharpie (regular tip) went to town....

I wrote our return address on the back flap in my regular handwriting and then we finished the envelopes off with the King and Queen of Hearts stamps.
We ended up doing inner envelopes as well (these came with our invitation suite from Michael's) but just printed everyone's names in the Renaissance font instead of handwriting them. What can I say my hand was pooped after the outer envelopes.
Black envelopes (6x9 Booklet Style) from Envelope Mall: 200 for $30
Some Fauxligraphy Tips:
1. This works best on non-white envelopes. For some reason, no matter what marker/pen I used on the white envelopes the ink soaked in around printed text and was evident that I traced.
2. Textured paper makes tracing soooo much harder! Try to avoid having to trace on textured paper it made my pen strokes look all the more sloppy.
3. Test out your writing apparatus A LOT. I can say this enough: practice, practice, practice. Practice writing each letter, practice using the marker/pen it really made a difference in the quality of my work.
I pulled up every calligraphy font I could find on my computer and on dafont and started practicing. The Mr. even tried his hand at some practice tracing but it wasn't a pretty sight. ;) We eventually settled on the same font Mrs. Labrador used.
After some trial and error (trying every color in the rainbow) I found the best way to print on the black envelopes and still see the print was to use LIME GREEN text. It was really faint but you could make it out.
Then me and my silver sharpie (regular tip) went to town....

I wrote our return address on the back flap in my regular handwriting and then we finished the envelopes off with the King and Queen of Hearts stamps.
We ended up doing inner envelopes as well (these came with our invitation suite from Michael's) but just printed everyone's names in the Renaissance font instead of handwriting them. What can I say my hand was pooped after the outer envelopes.
Black envelopes (6x9 Booklet Style) from Envelope Mall: 200 for $30
Silver Sharpies (4pk): $5
King and Queen of Hearts stamps: $88
Total cost per invitation: $1.03
Grand total for entire invitation: $3.37
Up next: Mailing these puppies out! :)
Friday, March 5, 2010
DIY Invitations Part IV: Suck It In...
...the belly band edition.
.JPG)

.JPG)

Cost:
-Offrey Ribbon (1.5" x 12') $2 per roll (used 9 rolls)
-Double Stick Tape: Already had (FREE)
-Mounting Tape: Already had (FREE)
-Cardstock for Monogram: Already had (FREE)
Total cost for invitations (made 120): $18
Total per invitation: $0.15
Grand total per invitation-to-date (belly bands, invitations, pocketfolds, envelope liners) : $2.34
Up next: Outer Envelopes and Mailing!!
Belly bands (n): Decorative emblishment usually used for paper products whose purpose is to hold many items together or closed.
When we last left off our invitations were nicely secured in our pocketfold but our pocketfold was flapping in the wind. What did we do to fix it?
I started by wrapping 1.5 inch wide ribbon around the pocketfold and securing the ends to each other with double stick tape. Don't worry it doesn't have to look perfect you are just going to cover it up.
Next I added a small piece of 3M Mounting Tape on top of the ribbon. This was just to give the invitations a little more dimension. You could easily just use double stick tape here as well.
Finally, I adhered the monogram that I developed in Publisher to the top. The Mr. painstakingly trimmed the scraps from our pocketfolds projects to 2" x 2" squares then adhered our monogram cut into 1.5" x 1.5" squares on top with double stick tape.
Cost:
-Offrey Ribbon (1.5" x 12') $2 per roll (used 9 rolls)
-Double Stick Tape: Already had (FREE)
-Mounting Tape: Already had (FREE)
-Cardstock for Monogram: Already had (FREE)
Total cost for invitations (made 120): $18
Total per invitation: $0.15
Grand total per invitation-to-date (belly bands, invitations, pocketfolds, envelope liners) : $2.34
Up next: Outer Envelopes and Mailing!!
Friday, February 26, 2010
DIY Invitations Part III: Love/Hate Relationship with a Printer
IF YOU ARE A GUEST TURN AWAY NOW
UNLESS YOU WANT TO SEE OUR SUPER AWESOME WEDDING INVITATIONS BEFORE YOU GET THEM IN THE MAIL!
Alright, for all you suprise-spoilers here is our completely printed wedding invitation suite.

Printing these babies at home saved us a lot of moolah but took FOREVER and A YEAR. I kid you not, we spent the better part of two weekends hand feeding paper into our over-worked printer and we're still not quite finished with some of the inner envelopes.
How did we do it? We stalked a few wedding invitation websites and picked out a few layouts/font combinations that we liked and then played around in Microsoft Word and Microsoft Publisher until we came up with a design we both could agree on. We then nitpicked the wording for a few more days, double and triple checked spelling, and then printed out a few dozen samples on regular computer paper.
Tip #1: Play around with your printers settings. Usually there is an advanced tab that is accessible from the print window. We ended up using an HP matte premium paper setting because there was no cardstock options, set our print quality to best, and custom set our printer paper size to fit each component of our invitation suite.



Tip #3: Wait your turn. I tried putting stacks and stacks of the card stock in the printer but inevitably the print would misfeed or grab too many and a few pieces would be ruined. To avoid this we hand-fed each piece of cardstock into the printer which took a really long time but proved to be less wasteful.
Time: Approximately 10-12 hours each day for about 4 days. Capitalize on your down time during this project (ie. when things are printing) and start assembling, applying stamps to envelopes, or any other quick project you can do.
Difficulty level: Medium. I consider myself pretty computer savvy but a few times at was at a loss for words as to why things just weren't printing correctly. My only advise is to keep messing around with it and eventually it will work.
Cost:
-Michael's BRIDE's Invitation Set included invitations, outer envelopes, large response cards (used for details insert), and response envelopes (didn't use): $40 for 40 (purchased with 40% off coupons)= $24
-Michael's BRIDE's all-purpse cards with envelopes: $15 for 40
-Stamps for response envelopes: 1 $0.44 stamp per envelope
-Printer cartridge: We didn't even use a whole cartridge so FREE.
-Test computer paper: Already had lying around so FREE.
Total cost for invitations (made 120): $24 x 3 + $15 x 3 + $0.44 x 120 = $169.80
Total per invitation: $1.42
(Source)

Printing these babies at home saved us a lot of moolah but took FOREVER and A YEAR. I kid you not, we spent the better part of two weekends hand feeding paper into our over-worked printer and we're still not quite finished with some of the inner envelopes.
How did we do it? We stalked a few wedding invitation websites and picked out a few layouts/font combinations that we liked and then played around in Microsoft Word and Microsoft Publisher until we came up with a design we both could agree on. We then nitpicked the wording for a few more days, double and triple checked spelling, and then printed out a few dozen samples on regular computer paper.
Tip #1: Play around with your printers settings. Usually there is an advanced tab that is accessible from the print window. We ended up using an HP matte premium paper setting because there was no cardstock options, set our print quality to best, and custom set our printer paper size to fit each component of our invitation suite.

The invitations were DIY BRIDE'S brand from Michaels so some assembly was required. We printed on the white cardstock, wrapped a piece of black ribbon (included) around the invitation and secured with tape under where the cardstock would lay, finally we attached the cardstock with glue dots (included).
Tip #2: Be patient. Little-miss-grabby-hands here pulled a few paper products off the printer before they had a chance to dry and smeared the ink. Thankfully we had a quite a few extras but it was a easy mistake to avoid.

We included lines that asked when our guests will be arriving and where will they be staying on our response cards to ensure we got everyone's OOT bags to them regardless if they were staying at the hotel we have a room block at or not.

Tip #3: Wait your turn. I tried putting stacks and stacks of the card stock in the printer but inevitably the print would misfeed or grab too many and a few pieces would be ruined. To avoid this we hand-fed each piece of cardstock into the printer which took a really long time but proved to be less wasteful.
Time: Approximately 10-12 hours each day for about 4 days. Capitalize on your down time during this project (ie. when things are printing) and start assembling, applying stamps to envelopes, or any other quick project you can do.
Difficulty level: Medium. I consider myself pretty computer savvy but a few times at was at a loss for words as to why things just weren't printing correctly. My only advise is to keep messing around with it and eventually it will work.
Cost:
-Michael's BRIDE's Invitation Set included invitations, outer envelopes, large response cards (used for details insert), and response envelopes (didn't use): $40 for 40 (purchased with 40% off coupons)= $24
-Michael's BRIDE's all-purpse cards with envelopes: $15 for 40
-Stamps for response envelopes: 1 $0.44 stamp per envelope
-Printer cartridge: We didn't even use a whole cartridge so FREE.
-Test computer paper: Already had lying around so FREE.
Total cost for invitations (made 120): $24 x 3 + $15 x 3 + $0.44 x 120 = $169.80
Total per invitation: $1.42
Grand total per invitation-to-date (invitations, pocketfolds, envelope liners): $2.19
Up next: belly bands, outer envelopes, and mailing them off!!
Up next: belly bands, outer envelopes, and mailing them off!!
Monday, February 1, 2010
DIY Invitations Part II: Pocketfolds
...aka how to make a pocketfold using legal sized (8.5 x 14) cardstock for less than $0.50 each!! You hear me $0.50 each?? Ok, well... was forced to be creative due to a little math error (I should have ordered custom paper that was 8.5 x 18, but I was having "bride brain" that day).
Here is what we are working towards:
I staggered the insert panel to show you that it is a double layer but after construction it should lay directly over the pocketfold backing.I will provide the exact measurements I used but obviously they can, and should, be customized to fit your invitation suite.
My invitations: 8.5" x 5.5"
RSVP inserts: 3.25 x 4.75"
Reception and Guest Info insert: 4.25" x 5.5"
POCKET FOLD
1) Determine where you want your folds to be. My folds ended up being at 3" (fold between flap and invitation panel) and 8.6" (fold between invitation panel and insert panel).
2) Score! Score your predetermined fold lines using a scoring blade.
(Scoring the 8.6" fold)
(Scoring the 3" fold)
POCKET MAKING
3) Create pocket panel. Because of my math error I did not have enough paper to to fold a pocket into the "pocket-fold" so I ended up cutting another panel of paper to be glued over top of insert panel. I then cut slits into top panel to create pockets. These panels were cut to 8.5" x 5.5".
4) Adding the pockets. I liked the pockets at 3" and 5" from the top so I marked horizontal guidelines. To create the actual pockets I measured my inserts to see how wide the pockets would need to be to hold the paper snug* but still allow for easy removal and reinsertion. The top pocket was cut to 4.25" wide and the bottom was cut to 3.25" wide. I found the best way to cut the pockets was using a paper cutter vice an Xacto-knife.
5) Attach it. Finally, I glued the pocket panel on to the backing using glue dots.**
THE FINALE
6) Bone fold. Be sure to use a bone folder to really crease all those folds tight. This will be very helpful when it comes time to stuff envelopes.
The final product....
We will be adding belly bands to keep the pocketfolds closed and add a splash of color but more on those to come later.
Time: This took WAY longer than I expected. Working alone I got about a quarter of them done in 8-10 hours. I finally enlisted my fiance and we knocked the rest out in about 6-8 hours.(Note this is for 120 pocketfolds)
Difficulty level: Medium-Hard. Pocketfolds (my way) involve A LOT of measuring and cutting. If you are not skilled with a paper cutter or rush making your measurement they can start looking sloppy.
Cost:
250 sheets of paper= $44.00 (we only used 180 sheets)
Glue= $25 (we went through a TON of glue... literally)
Bone folder (already had)
Paper cutter (already had)
Total per pocketfold: $0.47
Total per invitation-to-date: $0.77 (envelope liners and pocketfolds)
Notes
*I found that if the pockets were too large that the insert would slide down in between the insert panel and pocket panel and you can't get it out!!
*I found that if the pockets were too large that the insert would slide down in between the insert panel and pocket panel and you can't get it out!!
** Easier said than done. The placement of the glued panel was one of the hardest parts of this project just because nothing was cut perfect so it took a little fudging to get it all to look good.
Saturday, January 16, 2010
Glue Review (and Tape)
I don't know about you, but I think I have purchased at least five or six different types of glue for projects only to find out they didn't do what I needed them to do... well besides stick. I bet you are asking well what else are they supposed to do but please continue reading.
1. First up, hot glue. It is the staple in every girl's craft box.
(Source)
Pros:
-Works well on most surfaces including wood, plastic, metal, etc.
-Allows for some "wiggle" room, meaning there is some time to reposition the items gluing before glue sets.
-Inexpensive
Cons:
-Stringy
-Hot, I always burn myself
-Doesn't work well on paper
All in all, hot glue is a great and affordable tool for most projects except for paper but can be messy and should be used with caution (to avoid those burns).
2. Next, Scotch Double Stick Tape.

(Source)
Pros--Easy to use
-Sticks well
-Works great on paper
-Clean compared to other products reviewed
Cons-
-Expensive, especially if doing a big project
-Not much wiggle room
Double stick tape is great for smaller projects but is very expensive for larger projects. I used 1 roll of tape per 30-40 envelope liners and with each roll priced upwards of $2 it adds up.
3. Elmer's School Glue Sticks

(Source)
Pros:
-Purple color allows you to easily see where applied-Allows plenty of wiggle room
-Affordable
Cons:
-Creates lumpy, wrinkled look on paper especially if applied heavily.
-Slightly messy
Elmer's School Glue Stick should probably be reserved for children's crafts. It is easy to use but the finish product end up looking messy and juvenile.
4. Scotch Wrinkle-Free Glue Stick

(Source)
Pros:-Affordable
-Allows wiggle room
-Photo safe
-Dries without wrinkles, lumps, or bumps
Cons:
-Can be hard to find
-Hard to see where applying
-Sometimes requires second coat for long lasting stick
I found this method to be easiest to use for paper projects and was able to find it consistently in the scrapbooking area of Target.
5. Ad Tech Dot Glue Runner

(Source)
Pros:-Clean to use
-Affordable
-Repositionable
-Great sticking ability
Cons:
-Harder to use
Maybe it's just me, but I find it hard to make a straight line with this thing but the sticking power was awesome.
Friday, January 15, 2010
DIY Invitations Part I: Envelope Liners
Our store bought invitation kits needed a little personalization before they were sent out. The all white envelopes that accompanied the kit were, how do you say, blah. They were boring, white, sterile, etc. and we wanted them to feel elegant, graphic, bold, fun, and a touch preppy. After searching the internet, crafting stores, and not so crafting stores high and low for the perfect paper I crumpled into a tantrum in the middle of HobbyLobby. My lovely finance casually suggested, "What about these?" (*hands paper to me*) and I was sold.
1. To start open your envelope and make a template. This took a couple tries. I used plain computer paper and held everything up to our sliding glass door so I could easily trace the "lick lines" (I'm not so sure that is the technical term for the adhesive bonding on envelopes but that's what I always called it).

2. Create a thicker template from your computer paper draft. I used one of those three tab folders that I had lying around.
3. Trace your template onto the liner paper. I used 12x12 pieces of scrap booking paper and was able to fit three tracings onto each page. My envelopes were 8.75 x 5.75 and came with a BRIDES invitation suite from Michaels.
4. Cut out liners using scissors. Although you could probably use a paper cutter for some of the cuts the majority of this pattern needed to be cut by hand.
5. Use adhesive to attach liners to envelopes. I tried all different adhesives including: Scotch Double Stick tape, hot glue, Scotch Wrinkle-Free Glue Stick, Elmer's School Glue Stick, and Ad tech Dot Glue Runner. Stay tuned for my adhesive review in a later post but the Scotch Wrinkle-Free Glue Stick worked the best for this project.

6. Use bone folder to crease paper. This was somewhat tricky because the paper did not want to fold at the envelope's crease but with a little finesse I was able to crease all the liners.

7. Enjoy all your hard work!!

Time: It took me about one full day to do 120 envelopes including tracing, cutting, and gluing.
Difficulty level: Easy
Cost: Envelopes (part of invitation suite)- Free
Liner paper- $0.59 per page x 40 = $23.60
Bone folder (already had)- $10
Scotch Wrinkle-Free Glue Stick- ~$3.00 for 2 sticks
Total per invitation: $0.30 (includes everything but envelopes)
1. To start open your envelope and make a template. This took a couple tries. I used plain computer paper and held everything up to our sliding glass door so I could easily trace the "lick lines" (I'm not so sure that is the technical term for the adhesive bonding on envelopes but that's what I always called it).
2. Create a thicker template from your computer paper draft. I used one of those three tab folders that I had lying around.
3. Trace your template onto the liner paper. I used 12x12 pieces of scrap booking paper and was able to fit three tracings onto each page. My envelopes were 8.75 x 5.75 and came with a BRIDES invitation suite from Michaels.
6. Use bone folder to crease paper. This was somewhat tricky because the paper did not want to fold at the envelope's crease but with a little finesse I was able to crease all the liners.
7. Enjoy all your hard work!!
Time: It took me about one full day to do 120 envelopes including tracing, cutting, and gluing.
Difficulty level: Easy
Cost: Envelopes (part of invitation suite)- Free
Liner paper- $0.59 per page x 40 = $23.60
Bone folder (already had)- $10
Scotch Wrinkle-Free Glue Stick- ~$3.00 for 2 sticks
Total per invitation: $0.30 (includes everything but envelopes)
Subscribe to:
Posts (Atom)







